Pool Heater Parts

Coates has been the name to trust for quality and reliability in water heating equipment since the 1940’s and continues to lead the industry in quality and performance across their entire line of swimming pool products.

The pool and spa heaters are available from 1.5kW to 57kW and most can be ordered in single or three phase models. For large commercial applications we also offer heaters up to 300kW.

Current Models

ILS Series – 1.5kW to 5.5kW: Residential spas less than 400 gallons.
ST Series – 5.5kW to 11kW: Residential spas between 250 and 600 gallons.
CE Series – 12kW to 18kW: Large spas or small residential pools.
CPH Series – 24kW to 30kW: Residential pools and small indoor commercial pools.
PHS Series – 36kW to 57kW: Large pools and cold weather applications.

Coates Heater Parts Lists:

• COATES SHA, SHB, ST Spa Heaters Parts
• COATES CE, CPH, PHS Pool/Spa Heaters Parts
  
• COATES E5.5 & E11 SPA Heater Parts
  
• COATES 6ILS SPA Heater Parts
  
• COATES 6ILC SPA Heater Parts
  
• COATES 6IL SPA Heater
  

Replacement/Spare Flange O-Rings for Hayward H-Series swimming pool heaters.

• Model #: HAXFOR1930
• For use with: All H-Series heater models including H200, H250, H300,H400

Click below for the best deal on Hayward H-Series Flange O-Rings

Option 1:
Hayward H-Series Flange O-Rings HAXFOR1930

For your convenience, this part is labeled as number #6 in the following diagram(click to enlarge):

hayward_h-series_induced_draft_diagram

Go Back to the Hayward H-Series Induced Draft Pool Heater Parts page

Rear Wire Harness for Hayward H-Series swimming pool heaters.

• Model #: HAXWHA0002
• For use with: All H-Series heater models including H200, H250, H300,H400

Click below for the best deal on Hayward H series Rear Wire Harness

Option 1:
HSeries Rear Wire Harness HAXWHA0002

For your convenience, this part is labeled as number #5 in the following diagram(click to enlarge):

hayward_h-series_induced_draft_diagram

Below you’ll find the Heat Exchanger Assembly for the Hayward H250. It is one of the core components of the H250ID’s heating system, so it is advised that you keep it in peak condition.

• Model #: HAXHXA1251
• For use with: H250ID (H250 Induced Draft)

Click below for the best deal on H series Heat Exchanger Assembly for H250ID

Option 1:
H series Heat Exchanger Assembly – H250ID HAXHXA1251

For your convenience, this part is labeled as number #4 in the following diagram(click to enlarge):

hayward_h-series_induced_draft_diagram

Blower Gasket for Hayward H-Series Induced Draft pool heaters.

• Model #:  IHXBLG1930
• For use with: H100, H200, H250, H300, H350, H400

Click below to Purchase H-Series Blower Gasket IHXBLG1930:

Option 1: Hayward H-Series Blower Gasket IHXBLG1930

For your convenience, this part is labeled as number #3 in the following diagram(click to enlarge):

hayward_h-series_induced_draft_diagram

Combustion Blower  for the Hayward H SeriesInduced Draft 100,000 BTU & Up pool heaters.

• Model #: IHXBWR1930
• For use with: H100, H200, H250, H300, H350, H400

Click below to Purchase HXBWR1930:

Option 1: HSeries Combustion Blower IHXBWR1930

For your convenience, this part is labeled as number #2 in the following diagram:

hayward_h-series_induced_draft_diagram

This is the control bezel assembly (model #HAXCPA1932) for Hayward H-Series heater models:  H150, H200, H250, H300, H350, H400.

Replacement Part number: HAXCPA1932

Control Bezel Assembly Available for purchase at:

• PoolCenter -Hayward H-Series ED2 Bezel Assembly
• Amazon – Hayward H-Series ED2 Bezel Assembly

Diagram (Item is labeled #31 on Diagram)