Blower Gasket for Hayward H-Series Induced Draft pool heaters.
Option 1: Hayward H-Series Blower Gasket IHXBLG1930
For your convenience, this part is labeled as number #3 in the following diagram(click to enlarge):
hayward_h-series_induced_draft_diagram
Combustion Blower for the Hayward H SeriesInduced Draft 100,000 BTU & Up pool heaters.
Option 1: HSeries Combustion Blower IHXBWR1930
For your convenience, this part is labeled as number #2 in the following diagram:
hayward_h-series_induced_draft_diagram
Here is the Jacket top assembly for the Hayward H400 Induced Draft, 4000,000 BTU above ground pool heater.
Option 1: H400ID1 Jacket Top Assembly
For your convenience, this part is labeled as number #1 in the following diagram:
hayward_h-series_induced_draft_diagram
Here is the Jacket top assembly for the Hayward H250 Induced Draft, 250,000 BTU above ground pool heater.
Option 1: H250ID1 Jacket Top Assembly
For your convenience, this part is labeled as number #1 in the following diagram (click to enlarge):
hayward_h-series_induced_draft_diagram
ED-2 by Hayward
The H-Series ED2 heater is the second generation of ED pool heaters from the product line of Hayward pool heaters.
This is the 2nd of 2 in the series of parts. If your parts are not here, you may find more here on the first page of ED2 parts.
Please email us: info (at) poolheaterparts.org if you are looking for a part that is not listed and we will attempt to find it for you.
Click the links to view (we may forward you another website if we don’t have a listing for it.. prices may vary).
Diagram Below Provided by PoolCenter.com
hayward_h-series_ED2_poolheater-diagram
ED-2 by Hayward
the H-Series ED2 heater is the second generation of ED pool heaters from the product line of Hayward pool heaters.
This is the 1st of 2 in the series of Hayward H-Series ED2 replacement & spare parts. If your parts are not here, you may find more here on the second page of ED2 parts.
Please email us: info (at) poolheaterparts.org if you are looking for a part that is not listed and we will attempt to find it for you.
Click the links to view (we may forward you another website if we don’t have a listing for it.. prices may vary).
Diagram Below Provided by PoolCenter.com
hayward_h-series_ED2_poolheater-diagram
One of the staples in a line of Hayward pool heaters, the H-Series ED1 electronic pool & spa heater was designed for outdoor use with above-ground pools, ideally at altitudes less than 2,000 ft above sea level.
This is the 2nd of 2 in the series of Hayward H-Series ED1 replacement parts and Spare parts. If your parts are not here, you may find more here on the first page of ED1 Parts.
Click the links to view (we may forward you another website if we don’t have a listing for it)
Diagram Below Provided by PoolCenter.com
hayward_h-series_ED1_millivolt-electronic-diagram
hayward-h-series-induced-draft-pool-heater
One of many in the fine line of Hayward pool heaters, the Hayward Induced Draft Pool Heater is designed for use as an above-ground pool heater, at altitudes less than 2,000 ft above sea level.
Engineered for long-term operation and minimal maintenance, the induced draft mechanism insures that airflow remains intact so that water is heated in all conditions. This unit is available in natural gas or propane models (any parts that are specific to the fuel type are noted).
The following parts list includes parts for H-Series Models: H100, H200, H250, H300, H350, and H400
Diagram courtesy of poolcenter.com
hayward_h-series_induced_draft_diagram
This is the control bezel assembly (model #HAXCPA1932) for Hayward H-Series heater models: H150, H200, H250, H300, H350, H400.
Replacement Part number: HAXCPA1932
Swimming Pools in the News